Synonyms:
Bis(2-ethylhexyl)adipate, Di-(2-ethylhexyl)adipate, Adipic acid, Bis(2-ethylhexyl)ester
Catalog ID Number
Polytrans ID No. is: 010-300-015
CAS Registry Number
CAS RNo. is: 103-23-1
Formula
Chemical formula is:
C22H42O4
Molecular Weight
MW is: 371
To be used for
Dioctyl Adipate (DOA) is a typical, cold-resistant plasticizer for polyvinyl chloride, chloroethylene copolymer, polystyrene, nitrocellulose, ethyl cellulose and synthetic rubber. Its plasticizing rate is high and its color changes a little at high temperature. The products made with it have good softness at low temperature and lightproof. When processed it shows its good lubricity. The soft feeling of products is better. Its application is often in combination with main plasticizers such as DOP, DBP etc. for making cold-resistant agricultural plastic thin film, packing membrane for freezing food, cable, coating, leatherette, sheet materials and water pipes in the open air etc. Compounds made with it have low viscosity at the beginning and a good stability of viscosity.
Physical and Chemical properties
GRADE |
First |
Qualified
|
Description |
Oil colorless transparent liquid with a slight smell, does not dissolve in water but dissolves in trichloromethane, petrol, vinyl acetate, methanol, methyl-benzene, mineral oil, vegetable oil, other organic solvents, in glycol type it dissolves slightly |
Color (APHA, max) |
50 | 100
|
Ester content (%, min) |
99.0 | 99.0
|
Density at 20 oC (g/cm3) |
0.927±0.003 |
Acid value (mg KOH/gJ2, max) |
0.15 | 0.20
|
Flash point (oC, min) |
190 | 186
|
Loss on heating (%, max) |
0.25 | 0.30
|
Packing
Dioctyl adipate is poured into a new galvanized iron drum. Net weight of each drum is 180 kg, 4drums/palette.